Fusion ID1000 |
ID 1000 Indirect Fired Heat
This portable, self contained system provides clean not toxic and low moisture heat to the jobsite. With one of the largest onboard fuel tanks in its class, this system will provide consistent heat through long periods unattended.
Sat/Com GPS System
The Sat/Com GPS System Via Text Message, notifications are sent for power loss and low Fuel. Many different users may be notified; even the fuel company for notification for refueling. With the GPS the owner can track their equipment.
Fusion ID 1000
Dimensions Height: 88 inches
Length: 162 inches
Width: 92 inches
Weight: 3,500 lbs. Empty
5,720 lbs. with fuel
Engine CAT C1.5L diesel (Standard)
Glow plug cold start aid, Low oil pressure/high temperature auto shutoff
Starting: 12 volt
Kubota 1.5 L Diesel
Digital Display: Battery voltage – hour meter
120 VAC Display 60 hertz display
Push button start with auto glow plug cycle
Heaters
Two I.C.E. Frost Fighter IDF 500 indirect fired
heaters. Up to 505,000 BTU/HR each
One 16-in. duct flange per heater
20” Return air port for each heather to get a higher efficiency
Optional flexible ducting easily connects to heater output flanges
Standard fuel pump pressure gauges
2.3”WC static pressure allows up to 110 ft of 16” ducting
Heated Air Output: Total of 6,500 cfm from two heaters
Temperature Rise: 205° F (85° C)
Operating Time: Up to 46 hours without refueling
Generator
10 kw 1800 RPM Diesel Genset
Standard Trailer Includes
Trailer: Frame: Formed, welded steel
Fiberglass enclosure
Lockable access doors
6,000 lb torsion axle with
15 in. 6-lug wheels.
Safety chains
Adjustable height, reversible combination,
2 in. (50 mm) ball, 3 in. (75 mm) pintle hitch
Front screw jack
Hour meter
Interior compartment light
Turn signals, brake and taillights
Fuel System
Fuel requirements: No. 1 fuel oil or blend
Fuel Consumption:
Engine: 0.5 gph (2.2 Lph)
Heater: 3.0 gph for
500,000 btu per heater
Fuel Capacity: 300 gal.
Remote thermostat
Electric brakes
Dual 12” Duct end cap